Important Safety Notice
- Settings are starting points; test safely. Always run test cuts on scrap material before your final piece.
- Laser operation carries risk. Follow your manufacturer's safety guidance, wear appropriate protective equipment, and ensure proper ventilation.
Laser Settings
Engrave
Power
28%
Speed
66.6667 mm/s
Community Feedback
User-Reported Feedback
0% reported workedCommunity feedback reflects what other users reported on their setups. It does not confirm results on yours.
Based on 1 user-reported result
Community Warning
Some users reported issues with these settings on their setups. Always test on scrap material first and follow your normal safety process.
Machine Context
Compare this setup with your own machine before treating the settings as a starting point.
- Brand
- Creality
- Model
- Falcon2 Pro 40W
- Laser Type
- diode
- Wattage
- 40W
Closer machine context can make a setting more relevant, but it does not guarantee results.
- Compare with your machine
- Sign in and add a machine to compare this setup with your own.
Material Details
- Category
- Coated Metal
- Supplier
- Creality
- Thickness
- 6mm
Provenance
Source type
Supplier reference
Shared from a supplier or manufacturer reference. Useful for context and comparison, but not proof it will match your machine, material, or process.
Source details add context, not proof.
Shared from
Creality
Test Grid Generator
Create a LightBurn fill grid centred on this reference setting.
License
CC BY
You may share and adapt with attribution