Important Safety Notice
- Settings are starting points; test safely. Always run test cuts on scrap material before your final piece.
- Laser operation carries risk. Follow your manufacturer's safety guidance, wear appropriate protective equipment, and ensure proper ventilation.
Laser Settings
Engrave
Power
40%
Speed
90 mm/s
Lines
400 dpi
Notes
best setting for detailed photos
Additional Settings
Text Engrave
44% @ 90 mm/s
Notes
600 DPI
Community Feedback
No community feedback yet.
User reports can help add context, but they do not verify results for every setup.
Machine Context
Compare this setup with your own machine before treating the settings as a starting point.
- Brand
- Other
- Model
- Epilog Fusion Ascent 12
- Laser Type
- co2
- Wattage
- 59.8W
Closer machine context can make a setting more relevant, but it does not guarantee results.
- Compare with your machine
- Sign in and add a machine to compare this setup with your own.
Material Details
- Category
- Anodized Aluminum
- Supplier
- Johnson Plastics Plus
Provenance
Source type
Supplier reference
Shared from a supplier or manufacturer reference. Useful for context and comparison, but not proof it will match your machine, material, or process.
Source details add context, not proof.
Shared from
Epilog Suggested Material Settings
Reference link
www.epiloglaser.com/assets/downloads/fusion-material-sett...
Open sourceDownloads
No downloadable files
This material doesn't have any project files attached yet.
Test Grid Generator
Create a LightBurn fill grid centred on this reference setting.
License
CC0 (Public Domain)
No rights reserved, free to use