Important Safety Notice
- Settings are starting points; test safely. Always run test cuts on scrap material before your final piece.
- Laser operation carries risk. Follow your manufacturer's safety guidance, wear appropriate protective equipment, and ensure proper ventilation.
Laser Settings
Engrave
Power
50%
Speed
33.3333 mm/s
Frequency
20000 Hz
Cut
Power
100%
Speed
25 mm/s
Frequency
20000 Hz
Additional Settings
Image
100% @ 33.3333 mm/s
Community Feedback
No community feedback yet.
User reports can help add context, but they do not verify results for every setup.
Machine Context
Compare this setup with your own machine before treating the settings as a starting point.
- Brand
- Darkly Labs
- Model
- Emblaser 2
- Laser Type
- diode
- Wattage
- 5W
Closer machine context can make a setting more relevant, but it does not guarantee results.
- Compare with your machine
- Sign in and add a machine to compare this setup with your own.
Material Details
- Category
- Paper
- Supplier
- Darkly Labs
- Thickness
- 0.1mm
Provenance
Source type
Supplier reference
Shared from a supplier or manufacturer reference. Useful for context and comparison, but not proof it will match your machine, material, or process.
Source details add context, not proof.
Shared from
Darkly Labs
Test Grid Generator
Create a LightBurn fill grid centred on this reference setting.
License
CC BY
You may share and adapt with attribution