Important Safety Notice
- Settings are starting points; test safely. Always run test cuts on scrap material before your final piece.
- Laser operation carries risk. Follow your manufacturer's safety guidance, wear appropriate protective equipment, and ensure proper ventilation.
Laser Settings
Engrave
Power
40%
Speed
300 mm/s
Lines
200 lpcm
Cut
Power
60%
Speed
35 mm/s
Passes
5
Air Assist
Community Feedback
No community feedback yet.
User reports can help add context, but they do not verify results for every setup.
Machine Context
Compare this setup with your own machine before treating the settings as a starting point.
- Brand
- xTool
- Model
- S1
- Laser Type
- diode
- Wattage
- 40W
Closer machine context can make a setting more relevant, but it does not guarantee results.
- Compare with your machine
- Sign in and add a machine to compare this setup with your own.
Material Details
- Category
- Plywood
- Supplier
- Makerflo
- Brand
- TruFlat
- Color
- All colors
- Thickness
- 3.175mm
Provenance
Source type
Supplier reference
Shared from a supplier or manufacturer reference. Useful for context and comparison, but not proof it will match your machine, material, or process.
Source details add context, not proof.
Shared from
Makerflo Product Recommendations
Reference link
makerflo.com/pages/laser-settings
Open sourceDownloads
No downloadable files
This material doesn't have any project files attached yet.
Test Grid Generator
Create a LightBurn fill grid centred on this reference setting.
License
CC0 (Public Domain)
No rights reserved, free to use