Vendor
Important Safety Notice
- Settings are starting points; test safely. Always run test cuts on scrap material before your final piece.
- Laser operation carries risk. Follow your manufacturer's safety guidance, wear appropriate protective equipment, and ensure proper ventilation.
Laser Settings
Engrave
Power
60%
Speed
300 mm/s
Cut
Power
60%
Speed
15 mm/s
Additional Settings
Clear Frost Depth
18% @ 600 mm/s
Clear Frost
25% @ 600 mm/s
Photo (positive paint fil)
12% @ 169.33 mm/s
Community Feedback
No community feedback yet.
User reports can help add context, but they do not verify results for every setup.
Machine Context
Compare this setup with your own machine before treating the settings as a starting point.
- Brand
- Thunder Laser
- Model
- Nova 100
- Laser Type
- co2
- Wattage
- 100W
Closer machine context can make a setting more relevant, but it does not guarantee results.
- Compare with your machine
- Sign in and add a machine to compare this setup with your own.
Material Details
- Category
- Acrylic
- Supplier
- Thunder Laser USA
Provenance
Source type
Supplier reference
Shared from a supplier or manufacturer reference. Useful for context and comparison, but not proof it will match your machine, material, or process.
Source details add context, not proof.
Shared from
Thunder Laser USA
Test Grid Generator
Create a LightBurn fill grid centred on this reference setting.
License
CC BY
You may share and adapt with attribution