Important Safety Notice
- Settings are starting points; test safely. Always run test cuts on scrap material before your final piece.
- Laser operation carries risk. Follow your manufacturer's safety guidance, wear appropriate protective equipment, and ensure proper ventilation.
Laser Settings
Engrave
Power
50%
Speed
300 mm/s
Lines
140 lpcm
Cut
Power
60%
Speed
16 mm/s
Passes
2
Air Assist
Community Feedback
No community feedback yet.
User reports can help add context, but they do not verify results for every setup.
Machine Context
Compare this setup with your own machine before treating the settings as a starting point.
- Brand
- xTool
- Model
- S1
- Laser Type
- diode
- Wattage
- 40W
Closer machine context can make a setting more relevant, but it does not guarantee results.
- Compare with your machine
- Sign in and add a machine to compare this setup with your own.
Material Details
- Category
- Leatherette / Faux Leather
- Supplier
- Lonestar Adhesive
- Brand
- LoneStar Premium UV
- Color
- Cutthroat
- Thickness
- 1.5mm
Provenance
Source type
Personal library
Shared from a contributor’s own library or profile context. Useful for context, but not proof it will match your machine, material, or process.
Source details add context, not proof.
No additional source details were included with this reference. Use it as a starting point and interpret it alongside your machine, material, and process.
Test Grid Generator
Create a LightBurn fill grid centred on this reference setting.
License
CC BY
You may share and adapt with attribution